First of all check what is the compression ratio(CR) of ur Bolero engine. I am not sure but shud be about 20:1. If more than 21:1, then you have a major bill staring at you. You will either have to hunt for lower compression pistons OR search or get a custom made thicker head gasket. the second option is cheaper. U can look in to yellow pages for workshops which will cut the gasket for you. The third option, very expensive, work the head with some reputed lathe workshop. I will not recomend that.
If the CR is 20:1, then you can visit a scrap dealer. Look for the Indica diesel turbo charger(insist on the entire assembly) and intercooler. You will have to cut the exhaust pipe and make room for the same. Pust the catcon a little behind. The machanic will do that for you. But make sure you do it all with a good mechanis. Donot go to the service centre, they wont help you. And donot ever forget the intercooler. Incase you do not knw, thats just a small radiator. Open the Indica Turbo bonnet and see that for yourself. And once you find out the cost, do let me knw. |