My Alloy wheel size is 14x6 - 6" width. PCD is 4x100 & Offset is 30, should have been 38. I have gone for 6" width alloys coz after some enquiry, I have come to know that 195 tyres fit better in 6" alloys than 5.5, i really dont know how it makes any difference if we install 195 on 5.5 width alloys.
And coming to tyres touching the shocks, Iam still not sure whether its really touching or its just my feeling, but i felt it from front wheel, no prob with rear tyres touching even with 5 adults in car. The front tyre touching the suspension is with me alone driving, coz there is just 1.5 inch difference between tyre & shocks, and i think the inner corner part of tyre touches the shocks slightly only when we drive the car over speed breakers suddenly or if we are making the front part bounce too much or if the shocks are compressing too much, only then it touches. else its fine. I think if we stick to offset 38-45 or keeping the alloy width to 5.5 inches, this problem should not be there. Need to do some more research on this.
|