You are here : Community » Forums » Maintain Your Car » Maruti Esteem Wheel Balance problem
Today's Posts | Search Forums | My Messages

Maruti Esteem Wheel Balance problem

Pages : 12
#11 13-Nov, 2009 02:47 PM
Sunny
Long-termer
Joined Date: 22 Oct 2009
Location: New Delhi
Posts: 170
Likes: 0

wheel bearing can also give problems related to wheel shake



0 members liked this post
 
#12 14-Nov, 2009 02:52 PM
Selva Kumar
Best-seller
Joined Date: 29 Aug 2008
Location: Chennai
Posts: 596
Likes: 1

Amit

Manish has given good info,  you should do this way at least to locate worn out spare part(s). IMO under body rust should not be the reason for your problem. A good local garage preferably Maruthi cars specialist, would sort out this problem. Do not approach Platers/Welders for this problem.




Never mind what others say, do whats right for that moment!
0 members liked this post
 
#13 14-Nov, 2009 03:18 PM
Sunny
Long-termer
Joined Date: 22 Oct 2009
Location: New Delhi
Posts: 170
Likes: 0

also check the underbody for any cracks near suspension arm mount



0 members liked this post
 
#14 15-Nov, 2009 08:00 AM
Amit Malhotra
Road-tested
Joined Date: 09 Oct 2008
Location: New Delhi
Posts: 51
Likes: 3

Thnx Manish Rathor , Selva , Sunny & Aravindh ,

for you precious comments. I have noted down all points mentioned by you & now i will go to any Reliable comuterized wheel balance/alignment shop & will discuss these points with them.

Will update thread once that will done.



0 members liked this post
 
#15 15-Nov, 2009 10:40 PM
Manish
Long-termer
Joined Date: 12 Nov 2009
Location: Mumbai
Posts: 216
Likes: 4

All the best.



0 members liked this post
 
#16 16-Nov, 2009 08:36 PM
Sunny
Long-termer
Joined Date: 22 Oct 2009
Location: New Delhi
Posts: 170
Likes: 0

any update?



0 members liked this post
 
#17 24-Nov, 2009 01:24 AM
Manish
Long-termer
Joined Date: 12 Nov 2009
Location: Mumbai
Posts: 216
Likes: 4

Any update on Alignment



0 members liked this post
 
#18 24-Nov, 2009 02:33 PM
Amit Malhotra
Road-tested
Joined Date: 09 Oct 2008
Location: New Delhi
Posts: 51
Likes: 3

Yes ,

Now I have complete update , As I had shown to Maruti service station problem found in Apron of body on which wheel is based.

Both Apron have crack in Lower Part & will replace both one completely. which cost around 20000/- +

I also ask service center to replace only Lower par of apron. but they said Lower part of Apron need to Weld to Body & will not be a long term solution.



0 members liked this post
 
#19 24-Nov, 2009 07:12 PM
Sunny
Long-termer
Joined Date: 22 Oct 2009
Location: New Delhi
Posts: 170
Likes: 0

Hi if welding is not a solution then how will they fit the apron? they will also weld the apron to the body, visit a good local garage & seek a second opinion,welding can be done & it will also last.



0 members liked this post
 
Pages : 12